Anchor Monument Stencils & Fillers
Anchor Stencil 111 Designed specifically for hand-cutting. Panels can be replaced accurately and easily. Superior shape carving. Easier cutting means less wear on instruments. White release liner removes easily. Use with Intertape Anchor Filler #211.
Anchor Stencil 112 A convertible stencil designed for hand or machine cutting without reversing the liner. Extra-heavy red liner is designed for controlled release. Superior shape carving; easy, accurate panel replacement. Use with Intertape Anchor Filler #211.
Anchor Stencil 116 A high-tack computer stencil for use on raw wood surfaces and urethane foam board. 15" features trimmed edges and a strong, clear film liner that offers easy alignment and smooth, precise running on computerized sign-making machines. The 30" width tracks only on large pin plotters and the stencil rubber extends to the edge of liner. CAUTION: #116 has a very aggressive adhesive and is not recommended for use on some woods without first testing a sample piece. Do not use on pre-painted, pretreated or glass surfaces.
Anchor Stencil 117 Designed for use with computerized cutting machines. Trimmed edges on 15" roll allows smooth and easy tracking through the machine. A strong, clear film liner provides extra rigidity. The 15" width will track through most computer cutters. The 30" width will track only through a large pin plotter and the stencil rubber extends to the edge of liner. After letters and designs are cut, they must be taped for transferring the stencil to stone. Use with Intertape Anchor Filler #211.
Anchor Stencil 120 A multipurpose, medium-tack stencil designed for shape and depth carving in glass and pretreated, pre-painted or soft woods. Extremely easy to hand-cut. Dark blue release liner lifts away easily. Stencil holds securely during blasting. No fillers are required, saving time on application and cleanup. #120 can also be used on tile, pretreated urethane foam board and plexiglass. Size available: 25" width only.
Anchor Stencil 123 Designed for machine cutting and less wear on cutting dies. Excellent blast resistance and easy-to-recognize blue liner. Plastic sheet laminated to the stencil eliminates taping to stone and allows easy blast-through. Fast cleanup. Use with Intertape Anchor Filler #223 or # 333.
Anchor Stencil 123Y Product has a yellow 2-mil poly film between adhesive and rubber to identify any residue remaining after sandblast. Use with IPG Anchor #223 or #333 Filler.
Anchor Stencil 124 Same construction as #123. 2-mil polyester film holds letters and designs in place while transferring from computer to die. The holes are punched through the liner and rubber. Available in a 15" width/10 yard length, and a 30" width in both 10 and 20 yard lengths. Use with Intertape Anchor filler #223 or #333. Note: 30" width will work with large pin 30" plotters.
Anchor Stencil 124Y This product has a yellow 2-mil polyester film between outside adhesive and rubber to help identify any residue remaining on substrate after sandblast. Product is available in 30" widths. Rolls are 10 and 20 yards in length. Use with Intertape Anchor #223 or #333 Filler.
Anchor Stencil 125 A high-tack stencil designed for sandblasting on raw wood and urethane foam board. Easy-release orange liner. The strength of the adhesive eliminates the need for filler or spray adhesives. CAUTION: This stencil has a very aggressive adhesive and is not recommended for use on some woods without first testing a sample piece. Do not use on pre-painted, pretreated or glass surfaces. Size available: 25" width only.
Anchor Stencil 128 This 18-mil hand cut stencil is designed for glass etching, and can also be used on light stone, tile, and acrylic etching. The paper liner removes easily. Has a petroleum-based adhesive system and conforms nicely to curved or irregular surfaces. Available in 25" and 30" widths. All rolls are 10 yards in length. Use with Intertape Anchor Filler #211.
Anchor Stencil 129 Designed for use on most computer cutters, this product has a clear, 3-mil polyester film liner. Rubber is trimmed back from edges so only the liner runs through the computer sprocket system. 2-mil polyester film between outside adhesive and rubber holds centers in place while transferring stencil from computer to granite or marble. Construction (other than liner) is the same as Intertape Anchors popular #123 machine stencil. Available in 15" and 30" widths. The 15" width can also be used on most computer cutters; 30" works only on cutters with a standard 1/2" on center sprocket system. Use with Intertape Anchor Filler #223 or #333.
Anchor Stencil 129Y Product has a yellow 2-mil poly film between adhesive and rubber to identify any residue remaining after sandblast. Use with IPG Anchor #223 or #333 Filler.
Anchor Stencil 153 For use on friction-fed cutters. Can be used safely on pretreated and pre-painted wood, urethane foam board, glass, tile and acrylic. Rubber is trimmed back 1/2" along each edge so the wheels can clamp down on the 5-mil polyester film liner and carry the stencil through the computer. Since this type of plotter has no sprockets, holes are unnecessary (as in other computer stencils). Sizes available: 19-7/8" and 24" widths.
Anchor Stencil 154 Same construction as #123 computer stencil, blue liner and 2-mil polyester film between outside adhesive and rubber. Holes are IBM configuration (1/2" from center of hole to center of next hole), compatible with most computerized cutting machine with sprockets matching this alignment. Available in 123⁄4", 141⁄2", 15", 183⁄4", 25" and 30" widths. The 25" and 30" widths are available in 10 and 20 yard lengths; all others are available in 10 yard lengths. Use with Intertape Anchor Filler #223 or #333. Note: Style #154 will not work on large pin computerized cutters.
Anchor Stencil 154PC Specially treated to enhance cut line visibility. Available in 25" and 30" widths; 10 or 20 yards rolls. Use with Intertape Anchor #223 or #333 Filler.
Anchor Stencil 154Y Yellow 2-mil polyester film between outside adhesive and rubber to help identify residue remaining on substrate after sandblast. Available in 25" and 30" widths; 10 and 20 yard lengths. Use with Intertape Anchor #223 or #333 Filler.
Anchor Stencil 155 Same construction as #153 stencil, except this product has a water-based acrylic adhesive, rather than petroleum-based. Adhesion level is much higher than #153. Rubber is trimmed back 1/2" along each edge so the wheels can clamp down on the 5-mil polyester film liner and carry the stencil through the computer. Used on raw wood and urethane foamboard. CAUTION: #155 has a very aggressive adhesive and is not recommended for use on some woods without first testing a sample piece. Do not use on prepainted, pretreated or glass surfaces. Available in 197⁄8" and 24" widths.
Anchor Stencil 156 Same construction as our high-tack #116 computer stencil, except that the hole pattern is for use on standard 1/2" on center sprocket machines and edges are trimmed. Available in 30" width. CAUTION: #156 has a very aggressive adhesive and is not recommended for use on some woods without first testing a sample piece. Do not use on prepainted, pretreated or glass surfaces. Note: #156 will not work on the large pin 30" plotter; Style #116 is recommended for this use.
Anchor Stencil 157 Same construction as our medium-tack #117 computer stencil, except that the hole pattern is for use on standard 1/2" center sprocket system machines and edges are trimmed. Available in 30" width. Note: #157 will not work on the large pin 30" plotter; Style #117 is recommended for this use.
Anchor Stencil 158 Based on our #117 stencil with rubber extending to edges and liner is thinner; 2-mils thick. Available in 25" and 30" widths; 10 yard lengths. Does not have an inner mylar sheet, which means the centers have to be taped before transferring stencil from plotter to stone. Use on plotters with sprockets 1/2" on center only. IBM configuration. The #158 is an excellent product for use on stone and wood. Use with Intertape Anchor Filler #211.
Anchor Stencil 192Y Same construction as #129, except it is punched to work on a large pin plotter. Yellow 2-mil polyester film between outside adhesive and rubber helps identify any residue remaining on substrate after sandblast. Available in 30 inch only.
Anchor Stencil T226 High-tack BlastLite is a specially formulated rubber mask that is long-lasting and easy to use. Natural flexibility properties and impact resistance makes it ideal for all substrates where shallow blasting is required. BlastLite High-tack Stencils are coated with an acrylic adhesive for use on raw wood, unprimed HDU, brick or unglazed tile. Available unpunched or friction fed.
Anchor Stencil T227 Medium-tack BlastLite is a specially formulated rubber mask that is long-lasting and easy to use. Natural flexibility properties and impact resistance make it ideal for use on all substrates where shallow blasting is required. BlastLite Medium-tack Stencils are designed for primed and painted surfaces, glass, plastics, synthetic stone and glazed tile. Available unpunched or friction fed.
Anchor Stencil Fillers
 Anchor Stencil Filler 211 A medium tack adhesive designed for with stencil #111, #112, #117, #153, #157, and #158. On polished surfaces it is recommended that a light coat be applied. For best results on frosted, axed or steeled surfaces, apply two coats. Available in Gallons only.
Anchor Stencil Filler 223 A low tack adhesive designed for use with stencil #123, #124, #154, and #129. On polished surfaces it is recommended that a light coat be applied. For best results on frosted, axed or steeled surfaces, apply two coats. Available in Gallons only.
Anchor Stencil Filler 333 Water Base Stencil Filler is water washable. Compatible with all Anchor Stencil. Using a cheap nylon brush, apply a thin even coat across the surface. Allow the filler to dry, usually about 20 minutes. Filler will change from a milky blue/white color to a slightly amber/clear when it is dry. Simply wash off with soap and water. Available in Gallons only.
|
